Prayer to Guru Rinpoche for Removing Obstacles and Fulfilling Wishes

Prayer to Guru Rinpoche for Removing Obstacles and Fulfilling Wishes

༄༅། །རྡོ་རྗེ་ཚིག་རྐང་དྲུག་གི་གསོལ་འདེབས།
The Prayer in Six Vajra Lines

དུས་གསུམ་སངས་རྒྱས་གུ་རུ་རིན་པོ་ཆེ༔
dü sum sangye guru rinpoche
Embodiment of buddhas of past, present and future, Guru Rinpoche;

དངོས་གྲུབ་ཀུན་བདག་བདེ་བ་ཆེན་པོའི་ཞབས༔
ngödrub kün dak dewa chenpö shyab
Master of all siddhis, Guru of Great Bliss;

བར་ཆད་ཀུན་སེལ་བདུད་འདུལ་དྲག་པོ་རྩལ༔
barché kün sel düdul drakpo tsal
Dispeller of all obstacles, Wrathful Subjugator of Māras;

གསོལ་བ་འདེབས་སོ་བྱིན་གྱིས་བརླབ་ཏུ་གསོལ༔
solwa deb so jingyi lab tu sol
To you I pray: inspire me with your blessing,

ཕྱི་ནང་གསང་བའི་བར་ཆད་ཞི་བ་དང༌༔
chi nang sangwé barché shyiwa dang
So that outer, inner and secret obstacles are dispelled

བསམ་པ་ལྷུན་གྱིས་འགྲུབ་པར་བྱིན་གྱིས་རློབས༔
sampa lhün gyi drubpar jingyi lob
And all my aspirations are spontaneously fulfilled.

ཞེས་གཏེར་ཆེན་མཆོག་གྱུར་བདེ་ཆེན་གླིང་པས་སེང་ཆེན་གནམ་བྲག་གི་གཡས་ཟུར་བྲག་རི་རིན་ཆེན་བརྩེགས་པ་ནས་སྤྱན་དྲངས་པའི་དུས་བབས་ཀྱི་གསོལ་འདེབས་འདི་ཉིད་བྱིན་རླབས་ཤིན་ཏུ་ཆེ་བས་ཀུན་གྱིས་ཁ་ཏོན་དུ་གཅེས་པར་ཟུངས་ཤིག །
Discovered by the great terma-revealer Chokgyur Dechen Lingpa, from the right-hand side of the Sengchen Namdrak rock on Mount Rinchen Tsekpa, ‘The Pile of Jewels’. Because the blessing of this prayer, one intended for this present time, is so immense, it should be treasured by all as their daily practice.

| Rigpa Translations, 2015

Medicine Buddha Mantra (Chant as much as you can)

Druk Trace, a contact tracing app for Bhutanese during COVID-19

How to chant Jigten Wangchuk (Prayer for Zhabdrung Ngawang Namgyel)

Setup FTP Server On CentOS, RHEL Linux 6.5/6.4/6.3

Install vsftpd

All commands should be run with ‘root’ user. Run the following command in terminal to install vsftpd package:

# yum install vsftpd ftp -y

Configure vsftpd

Edit vsftpd configuration file /etc/vsftpd/vsftpd.conf, 

Find the following lines and make the changes as shown below:

## Set to "NO" ##
anonymous_enable=NO

## Uncomment ##
ascii_upload_enable=YES
ascii_download_enable=YES

## Uncomment - Enter your Welcome message - This is optional ##
ftpd_banner=Welcome to UNIXMEN FTP service.

## Add at the end of this  file ##
use_localtime=YES

Start the vsftpd service and make it to start automatically on every reboot:

# service vsftpd start
# chkconfig vsftpd on

By default, root user is not allowed to login to ftp server for security purpose. So let us create a testing user called “karsel” with password “password”:

# useradd karsel
# passwd karsel

Connecting to FTP server

Now let us try to connect to FTP server itself with user “karsel”:

# ftp 192.168.1.1
Connected to 192.168.1.1 (192.168.1.1).
220 Welcome to UNIXMEN FTP service.
Name (192.168.1.1:root): karsel
331 Please specify the password.
Password:
500 OOPS: cannot change directory:/home/karsel
Login failed.
ftp> 

Probably you will get an error like “500 OOPS: cannot change directory”.

This is because your SELinux restricts the user to log in to ftp server. So let us update the SELinux boolean values for FTP service:

# setsebool -P ftp_home_dir on

Now try again to login to FTP server:

# ftp 192.168.1.1
Connected to 192.168.1.1 (192.168.1.1).
220 Welcome to UNIXMEN FTP service.
Name (192.168.1.1:root): karsel
331 Please specify the password.
Password:
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>  

How to find the hidden files (Windows PC)

Follow the following steps
1. Goto command prompt
2. Type Drive Letter (eg D, E) to show the hidden files and press enter
3. Type dir /ah to see the files and folders
4. Type attrib /s /d * -r - a -s -h and press enter
Now open your drive, you will find the files and folders hidden in the drive are shown

How to disable and enable access to USB port

Do you want to disable access to your USB ports so that no one can read or write data through your USB ports? Follow these simple steps to disable USB ports:

• Type regedit in run.
• Go to the path HKEY_LOCAL_MACHINE > SYSTEM> CurrentControlSet> Services> USBSTOR
• In right panel, double click on Start.
• Change its value to 4.
• To enable access to USB ports. Follow these simple steps:
• Change its value to 3.
• That's all.